Raptor SR designed for Inspire 2
$149.00
tax excluded

Features:

  • Concurrent dual band 2.4 & 5GHz
  • QuickAttach mounting system
  • Adjustable tilt of the range extender
  • Dedicated pigtails
  • No drilling required
  • No modification to the drone itself
  • Design does not contain any removable parts
  • Complete solution
Estimated shipping time is 3 days

Loading...
Raptor_SR_białe_tło.jpg
Designed for Inspire 2

DJI Inspire 2 is one of newer models made for professional users. It is definitely a flagship of professional models currently available on the market. The drone’s body is made from magnesium alloys. Cameras included are easily interchangeable with quality up to 5.2k. The basic kit allows for up to 30 minutes of uninterrupted flight, maximum speed of 90km/h.
4Hawks antenna significantly increases  the range of Dji Inspire 2, so the drone can reach even further than ever before. Additionally, the strength of the signal is improved, especially in noisy areas.
Last but not least, with 4Hawks range extender, the video quality is always glitch free, thanks to a strong, uninterrupted signal, that is supported by two frequencies operating at the same time.

antena-do-description.jpg
Extender Flight Range

Extender Flight Range

Noise removal from other devices

Noise removal from other devices

Improved video signal

Improved video signal

Adjustable signal direction

Adjustable signal direction

High quality, lightweight design

High quality, lightweight design

Complete solution

Complete solution

Separate-light-line.jpg

Specification

electrical & mechanical parameters of Raptor renge extender.

Electrical parameters

Frequencies
Port 1:   2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2:   2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Gain
Port 1:   8 dBi  (+/- 1 dBi) & 10 dBi  (+/- 1 dBi)
Port 2:   8 dBi  (+/- 1 dBi) & 10 dBi  (+/- 1 dBi)
VSWR
Port 1:   < 1.50  (max. < 2.15)
Port 2:   < 1.50  (max. < 2.15)
Beamwidth
Port 1:   90°/65° & 55°/55°
Port 2:   90°/65° & 55°/55°
Polarization
Port 1:   Vertical
Port 2:   Vertical
Impedance
Port 1:   50 Ω
Port 2:   50 Ω

Mechanical parameters

Material
Antenna:   Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting:   Stainless steel + paint
Weight
~ 200g (110g Antenna + 90g Mounting)
Dimensions
16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch
Connection
Port 1:   RP-SMA female
Port 2:   RP-SMA female
Tilt adjustment
3 tilt positions, OnClick system
Mounting type
On SMA connectors (Permanent)
Separate-light-line.jpg

In the box

Accesories included to the Raptor range extender antenna
Range extender antenna

Range extender antenna

2x Dedicated for Phantom MMCX pigtails

2x Dedicated for Phantom MMCX pigtails

Stainless steel mounting kit

Stainless steel mounting kit

2x screwdriver (Torx T6 & Philips) + 8mm wrench

2x screwdriver (Torx T6 & Philips) + 8mm wrench

2x RP-SMA male RG316 black pigtails

2x RP-SMA male RG316 black pigtails

Separate-light-line.jpg

Plots

VSWR, Separation between connectors & characteristic patter of Raptor antennas
Separate-light-line.jpg

Tutorials

Video tutorial with modification of the controller
4Hawks-product-endline.jpg
CONTACT US
+48 577 667 761

Range extender for